2.5mm Uv Marble Sheet

The following points should be noted during the use of high-gloss UV boards:
1. Installation
Handle with care: The surface of high-gloss UV boards has high gloss. Be careful and gentle during transportation and installation to avoid collisions and scratches to avoid damaging the high-gloss effect of the surface.
Professional installation: It is best to be installed by professionals to ensure the quality of installation. During installation, the wall or base must be flat, otherwise it will affect the fit and overall effect of the board.
Pay attention to gap treatment: If splicing installation is required, pay attention to the gap treatment at the splicing, and try to achieve seamless splicing or uniform and beautiful gaps. Special caulking agents or sealants can be used for treatment.
2. Daily maintenance
Cleaning method:
Use a soft dry or wet cloth to gently wipe the surface, and avoid using rough rags or brushes to avoid scratching the surface.
For stains that are difficult to remove, you can use a mild detergent, but avoid using detergents containing strong acids, strong alkalis or corrosives to avoid damaging the surface of the board.
Do not use excessive force when cleaning to avoid damaging the high-gloss layer.
Avoid high temperature contact: High-gloss UV boards are not resistant to high temperatures. Avoid direct contact with high-temperature objects, such as hot pots and kettles. Otherwise, the board may deform, discolor, or lose its surface gloss.
3. Environmental factors
Moisture-proof: Although high-gloss UV boards have certain moisture-proof properties, when used in a humid environment, you should still pay attention to maintaining good ventilation and avoid long-term contact with moisture. If the environment is too humid, the board may swell, deform, or mold.